Advanced Maritime Protection Solution
With over 40 years of developing high-performance sealants and adhesives, MW Polymers has a long history of supporting maritime and offshore operations. Our deep industry knowledge means we understand the demanding conditions at sea—from constant moisture and saltwater exposure to high mechanical stresses—and we are equipped to solve even the most complex challenges.
We supply a wide range of marine-grade sealants and adhesives that meet relevant industry standards and regulatory requirements. Many of our products are designed for versatile use across vessels, offshore structures, and port facilities. And when a specialized solution is required, we can engineer bespoke formulations precisely tailored to your operational environment, installation needs, and durability expectations.
TITAN WRAP™ – emergency repair bandage
Titan Wrap™ is a rapid-setting, water-activated pipe repair bandage engineered for shipboard and marine infrastructure use. Once soaked and applied to the damaged section, Titan Wrap™ cures within minutes to create a tough, steel-hard protective sleeve that seals leaks and reinforces compromised piping.
Well-suited for emergency repairs at sea, dockside maintenance, and offshore service operations, Titan Wrap™ adheres to metal, plastic, rubber, fiberglass, and composite pipework—even in wet, saltwater, or pressurised environments.
Lightweight and stowable, Titan Wrap™ requires no specialised tools and can be applied quickly by crew, reducing downtime and keeping critical systems operational. Its cured surface is corrosion-resistant, providing a long-lasting, durable seal against the harsh marine environment.
When reliability and readiness are essential at sea, Titan Wrap™ is the solution you can trust.
Emergency Pressurized Line Leak Control
Rapidly sealing active leaks on pressurized seawater, freshwater, or utility piping systems.
Reinforcement of Corroded or Thinned Pipe Sections
Strengthening deteriorated pipe walls to restore integrity and prevent further failure.
Sealing Micro-Cracks and Fine Perforations
Closing hairline fractures, pinholes, and seepage points in metal or composite pipework.
Protection of Joints, Couplings, and Threaded Fittings
Encapsulating connection points to prevent leakage and resist vibration or mechanical stress.
Coverage for Bends, Elbows, and Irregular Pipe Shapes
Forming a conformal wrap around curved sections where traditional clamps may not seat evenly.
Field-Deployable Permanent or Temporary Repair Solution
Allowing effective pipe repairs when replacement parts, dry-docking, or system shutdown are impractical.
Water-Triggered Curing Process
Begins curing upon exposure to moisture, allowing use in damp or submerged conditions.
High Pressure Resistance
Maintains seal integrity under internal or external pressure loading.
UL94 Flame-Rated
Tested to meet recognized flammability safety standards.
Rapid Cure Time
Reaches handling and service readiness quickly to minimize downtime.
Ready for Field Deployment
Suitable for on-site application without specialized equipment.
Chemical Resistant
Stable when exposed to oils, fuels, solvents, and common industrial chemicals.
ENCAPX™ encapsulation resins
Here is a maritime-oriented rephrasing: Encapsulation resins are protective compounds used to seal and safeguard electronic controls, wiring assemblies, and electrical modules throughout marine systems. Their role is to shield these components from moisture, salt spray, vibration, chemical exposure, and temperature fluctuations commonly encountered at sea.
Our polyurethane encapsulation resins are formulated specifically for marine service conditions. They offer high flexibility and impact resistance, allowing them to absorb shock and vibration without cracking. These materials also maintain reliable thermal stability, performing well in both engine-room heat and cold-deck environments. Additionally, they are engineered to meet UL94 V-0 flammability standards, delivering dependable fire-resistant performance where safety and compliance are critical aboard ship.
Withstand High Operating Temperatures (150–300°C)
Capable of maintaining performance and stability in engine room, exhaust routing, and thermal management zones.
Non-Outgassing in Confined or Low-Pressure Environments
Designed to avoid releasing vapors or contaminants when used in sealed compartments or controlled atmospheres.
Excellent Electrical Insulation Properties
Provides reliable dielectric protection for electrical systems, power distribution, and sensor wiring.
Durable Under Vibration and Mechanical Shock
Maintains strength and adhesion despite continuous hull movement, engine vibration, and impact loading.
Resistant to Marine Fuels, Lubricants, and Hydraulic Fluids
Stable when exposed to diesel fuel, hydraulic oils, gear lubricants, and other common shipboard chemicals.
-
UL94 Flame-Safe Construction
Approved for use near electrical panels and engine-room heat sources.Chemical Durability
Unaffected by common shipboard cleaners and maintenance chemicals.Fuel & Hydraulic Oil Resistant
Resists breakdown from diesel, turbine fuels, and hydraulic service fluids.
VOID-EX™ void-filling foams
Our CO₂-Free VOID-EX™ void-filling foam range is engineered to address space, support, and vibration challenges within marine vessels and offshore structures. Developed for lightweight reinforcement, these foams expand to fill gaps, voids, and irregular cavities, creating stable, uniform support without adding unnecessary weight.
In demanding maritime environments, VOID-EX™ foams help reduce noise and vibration, prevent component movement during vessel operation, and protect sensitive equipment from mechanical stress. They adhere effectively to composite panels, metals, and engineered plastics commonly used in shipbuilding and marine system installations.
Featuring consistent cell structure, low density, and controlled expansion, VOID-EX™ foams deliver reliable performance while maintaining weight efficiency—critical for vessel balance, fuel economy, and structural integrity. Once cured, they provide strong dimensional stability and long-term durability, even under fluctuating temperatures, humidity, and repeated dynamic loads at sea.
VOID-EX™ products are offered in multiple grades to suit specific marine applications, including lightweight structural reinforcement, vibration dampening, and cushioning for electronics enclosures, interior bulkheads, fairings, access channels, and equipment housings.
Bulkhead and Panel Void Filling
Filling internal gaps within fiberglass, composite, or sandwich panels to prevent vibration noise and increase structural stiffness.
Electronics Bay and Navigation Equipment Bracing
Securing wiring looms, control modules, and navigation systems to reduce vibration, shock, and wear from hull movement.
Pipe Runs, Cable Trays, and Vent Trunk Stabilization
Limiting movement of cabling, piping, and ventilation ducts exposed to engine vibration or hull flexing.
Cabin and Accommodation Panel Reinforcement
Increasing rigidity of interior wall, ceiling, and deck panels without adding excessive weight, improving durability and comfort.
Fairing, Radar Dome, and Deck Housing Support
Providing lightweight internal backing for thin composite structures to prevent flex and cracking under wave or wind loads.
Engine Room and Service Bay Void Management
Filling irregular spaces where vibration damping is needed to reduce resonance, rattling, and component fatigue.
Noise and Vibration Mitigation
Absorbing mechanical and acoustic energy to help lower cabin, bridge, and crew space noise levels.
Assembly and Repair Gap Filling
Used to accommodate fit-up tolerance variations or restore structure when material loss or uneven surfaces are encountered during repair.
Cargo and Equipment Bay Stabilization
Cushioning and securing stored gear, sensor units, or mounted equipment to minimize impact and movement in heavy seas.
Zero CO₂ Release
Formulated to avoid CO₂ generation during curing, making it safer in confined shipboard spaces.
High Expansion Ratio (30:1)
Lightweight foaming action allows efficient cavity filling with minimal material usage.
UL94 Flame-Rated
Meets recognized flame-resistance standards for use near electrical panels and machinery spaces.
Strong Chemical Resistance
Maintains performance when exposed to harsh marine chemicals and cleaning agents.
Resistant to Marine Fuels, Lubricants, and Hydraulic Oils
Compatible with diesel, turbine oils, hydraulic fluids, and other common shipboard service fluids.
We’ll Propose A Fast and Effective Solution for Your Problem
All customers can expect a proposed solution within 48 hours, but if you get in touch with our team and tell us more about your requirements, we will do our best to solve your problem within your required time frame.
Give us a call today on 01332 835001.